AccuAir Suspension e-Level™ Electronic Leveling Air Management Package

AccuAir Suspension e-Level™ Electronic Leveling Air Management Package
Manufacturer
Availability
In stock
Product code
AA AMP1 RSW S1
NEW


The product AccuAir Suspension e-Level™ Electronic Leveling Air Management Package is in your basket .
Order it now



Description

e-Level™ Electronic Leveling Air Management Package with Rocker Switch



  • For all Vehicles with air suspension installed.


Features:



  • 3 Programmable Heights Lowered / Ride Height / Raised.

  • RideMonitor™ Mode adjusts as needed while driving or parked.

  • TruPosition™ Height Sensors provide accurate leveling regardless of load.

  • Ride-Height-on-Start gets you ready to drive when you turn the key.

  • Anti “Cross-loading” Technology gives balanced spring weights.

  • Key-Chain Remote (optional) accesses your 3 programmable heights from up to 200 ft away.

  • Automatically Calibrates to any Air Suspension System on any vehicle, (NO user programming required).

  • Straight to Height adjustments avoid valve “pulsing” and gets you ready to drive immediately.

  • Active Learning maximizes leveling performance after every adjustment.

  • Manages Air Compressors for faster height recovery.

  • Monitors Vehicle Voltage and automatically turns compressor(s) OFF at 10.5 volts to prevent a dead battery.

  • 100% Weather-Proof for under vehicle mounting.

  • Plug-n-Play wiring harnesses for ease of installation.

  • Each System is 100% Factory Tested.


Kit Includes:



  • Electronic Control Unit (ECU)

  • Rocker Switch Interface & Main Harness

  • Ride Height Sensors w/ Linkage

  • 4-Corner Height Sensor Harness (20/20/16/16 ft)

  • 4-Corner Solenoid Valve Harness (1 ft Pigtail)

  • Main Power Harness with Built In Fuses

  • 0-200 psi Tank Pressure Sensor

  • Stainless Steel Mounting Hardware Package

  • VU4 4 Corner Valve Unit

  • Single Viair 400C Compressor Kit

  • 5 Gallon Anodised Aluminum Air Tank

  • Serviceable Aluminium Air Filter

  • 3/8"" D.O.T. Approved Plumbing Kit

  • Illustrated Installation & Operation Manuals


Technical Specification



  • Compatible with any vehicles with 4-Corner Full Air Suspension

  • 3 Savable Heights & All-Down

  • 10.5-16 Volts Required Voltage

  • 15 Amps (Max) Current Requirements

  • (8) 12-volt solenoid valves up to 3 Amps each Valve Output

  • 3-Amps Max Compressor Output

  • 110 psi ON; 150 psi OFF Tank Pressure Range

  • IP67 certified (immersion up to 3 ft) Connectors

  • USB – Mini B TouchPad™ Connector

  • 1/8” at wheel while parked or driving Position Accuracy

  • 5 seconds parked / 45 seconds driving Leveling Response TimeFor all Vehicles with air suspension installed.


Features:



  • 3 Programmable Heights Lowered / Ride Height / Raised.

  • RideMonitor™ Mode adjusts as needed while driving or parked.

  • TruPosition™ Height Sensors provide accurate leveling regardless of load.

  • Ride-Height-on-Start gets you ready to drive when you turn the key.

  • Anti “Cross-loading” Technology gives balanced spring weights.

  • Key-Chain Remote (optional) accesses your 3 programmable heights from up to 200 ft away.

  • Automatically Calibrates to any Air Suspension System on any vehicle, (NO user programming required).

  • Straight to Height adjustments avoid valve “pulsing” and gets you ready to drive immediately.

  • Active Learning maximizes leveling performance after every adjustment.

  • Manages Air Compressors for faster height recovery.

  • Monitors Vehicle Voltage and automatically turns compressor(s) OFF at 10.5 volts to prevent a dead battery.

  • 100% Weather-Proof for under vehicle mounting.

  • Plug-n-Play wiring harnesses for ease of installation.

  • Each System is 100% Factory Tested.


Kit Includes:



  • Electronic Control Unit (ECU)

  • Rocker Switch Interface & Main Harness

  • Ride Height Sensors w/ Linkage

  • 4-Corner Height Sensor Harness (20/20/16/16 ft)

  • 4-Corner Solenoid Valve Harness (1 ft Pigtail)

  • Main Power Harness with Built In Fuses

  • 0-200 psi Tank Pressure Sensor

  • Stainless Steel Mounting Hardware Package

  • VU4 4 Corner Valve Unit

  • Single Viair 400C Compressor Kit

  • 5 Gallon Anodised Aluminum Air Tank

  • Serviceable Aluminium Air Filter

  • 3/8"" D.O.T. Approved Plumbing Kit

  • Illustrated Installation & Operation Manuals


Technical Specification



  • Compatible with any vehicles with 4-Corner Full Air Suspension

  • 3 Savable Heights & All-Down

  • 10.5-16 Volts Required Voltage

  • 15 Amps (Max) Current Requirements

  • (8) 12-volt solenoid valves up to 3 Amps each Valve Output

  • 3-Amps Max Compressor Output

  • 110 psi ON; 150 psi OFF Tank Pressure Range

  • IP67 certified (immersion up to 3 ft) Connectors

  • USB – Mini B TouchPad™ Connector

  • 1/8” at wheel while parked or driving Position Accuracy

  • 5 seconds parked / 45 seconds driving Leveling Response Time